The universal relay testing solution
ARTES 600 is the compact and universal solution for testing all types of protection relays. Because of the built-in control panel, the light weight and the low noise level, the robust test system can be used on site as well as in laboratories.
ARTES 600 makes light work of highly complex test tasks. 4 voltage outputs and 6 current outputs which can provide particularly high output power allow three-phase tests on static, digital and self-powered relays. Even three-phase tests on differential protection relays can be carried out without additional equipment.
- Multi-function inputs for measurement of analog and binary signals
12 multi-function inputs are assigned to 6 galvanically separated groups. These inputs can be used for analog quantities as well as for binary signals. The response threshold and the response range can be freely configured for evaluation purposes.
- Test currents of up to 96 A with parallel operation
The current amplifiers provide a maximum test current of 6 x 32 A. Parallel operation of the current outputs allows output of up to 3 x 64 A for 3-phase applications and up to 96 A for 1-phase applications.
- Generator socket for connection of the device to be tested
Three voltages and three currents can alternatively be picked up via the generator socket. The device to be tested can be connected to the test instrument simply, correctly and quickly using a generator connection cable.
- High-accuracy low-level signal outputs
Special low-level outputs with very high accuracy make it possible to test protection devices with low-level signal inputs. The behavior of various different sensors, such as Rogowski coils, is reproduced precisely.
- Separate DC output
The separate DC supply can be used to power the device to be tested, for example. The range is between 12...260 VDC.
- Output of control commands via 4 binary outputs
During output, 4 binary signals can be output in real time parallel to the analog quantities.
- LEDs for status indication
The user can tell at a glance which outputs are active and can easily identify the states of the binary inputs and outputs.
- Operation in a vertical position
All connections and interfaces are located on the front panel. This means that ARTES 600 can be operated in an upright position if there is not enough space or if no table is available.
